1 / 4
Flashforge Foto 8.9 Z Axis Spacer for magnetic Build Plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4mm z-axis spacer for Flashforge Foto 8.9 resin printer Needed as there wasn't quite enough play when I fitted a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
4mm z-axis spacer for Flashforge Foto 8.9 resin printer
Needed as there wasn't quite enough play when I fitted a magnetic build plate. The two lugs locate into the printer so it says in place with the fitting screw removed.
50% infill used as it's constantly under pressure but not sure if necessary.
Designed in tinkercad.
Print Settings
Printer:
Tronxy P802 MA
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Category: 3D Printer Accessories