IRobot Braava Jet 240 / 250 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
iRobot Braava Jet 240 / 250 Wall Mount that I designed to store the robot mop out of the way on the wall
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
iRobot Braava Jet 240 / 250 Wall Mount that I designed to store the robot mop out of the way on the wall. Jet 240 and 250 models appear to be identical other than the accessories that come in the box so will work for both.
Holds the robot upright using the battery mount and is a friction fit. Make sure there is no water left before storing otherwise it will leak out.
There are Four screw holes to attach to the wall as the robot is reasonably heavy and so I would not trust sticky pads to be strong enough unless you have a clean surface to stick to.
Printed at 25% gyroid infill with 4 walls for strength as the part is constantly under the weight of the robot.
Printed in orientation as per the STL (i.e. flat wall part down on the plate) with support for critical areas only.
Print Settings
Printer:
Bambu P1P
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament:
Matt White
Notes:
25% gyroid infill with support critical areas only so as not to add supports to the screw holes
How I Designed This ===================
Designed in Tinkercad
https://www.tinkercad.com/things/l1IjclhOKUp
Category: Organization