1 / 2
Honeycomb wall pliers holder (60mm x 20mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to increase the width to 20mm wide because my pliers did not fit in the original design
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 330
- Wydruki
- 3
- Wyświetlenia
- 911
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (115)Powiązane
Original design is great. But only 15mm wide for each plier. Mine were larger than that.
60mm x 20mm = refers to the size of the rectangular opening for each plier
You will need 2 empty inserts (insert-empty.stl) from the Honeycomb Storage wall system