Trailer jack wheel replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No supports needed. Fits 20mm center axle. Total width 60mm (50mm + 2 x 10mm washers) Diameter ~200mm
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Trailer support / jack wheel.
Fits Gaupen trailers and likely others.
Print side down. Example printed using PETG filament, with 5 walls and a single solid horizontal center layer in the print direction (2mm thick). More layers are probably needed for necessary strength. The holes stabilizes the wheel sideways (due to the strength being in the walls).
I got some breakage with these settings and this design. The surface towards the ground looks very nice, but is probably not the strongest way to design this wheel replacement. I'e published a stronger version here: Trailer jack wheel v2