"Matchstick" diffusor for generic WS2812B strips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Similar to the original but works with generic LED strips instead of the custom PCB
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Similar to the original but works with generic LED strips instead of the custom PCB. The strips can be up to 14mm wide and is slid in from the back, similar to the diffusor. To mount, choose one of the clips from the original and glue them into the slots with a bit of super glue.
There is a small cut out on top to route out the tables, I added a small support there that you can simply break out.
The one shown in the image is 12mm shorter than the model for download because I had to print it on the V0, my Ender…….had a small problem 🚒 The model here is the same length as the original.