Nintendo DS Lite GBA Slot Cover Replacment PCB / Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for DS Lite GBA Slot Cover replaces a missing PCB and allows the cover to stay in place.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1295
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement for a Missing Nintendo DS Lite GBA Slot cover, at least the PCB part, this is primarity used if you do a shell swap, and have an empty slot cover without the PCB that helps keep the cover in the slot.
This has very simular dimension to the PCB, however it does not have the indivual ribs / pads that are included on the PCB, on some DS Lite's this may cause the slot to be slightly hard to pull out.
On a side note, this will wear down over time, so try using a hard-ish plastic, but overall it wont last as long as an PCB.
