Mamiya 645 Super Pro TL Crank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My journey to not pay $100USD+ for a crank made me do this
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 378
- Wydruki
- 0
- Wyświetlenia
- 1913
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model is almost fully 3d printed (except for the M2 screws needed for rotating it).
The print ONLY needs touching buildplate support, there is a gap between the lock mechanism and the advance mechanism that should be printed in mid air. Last pictures pictures show the faces that must be supported, any other faces DON'T NEED SUPPORT.
Parts needed:
Filament (printed mine in black matte PLA, and seems very sturdy)
1x M2x12
1x M2x8
2x 5mmx3mm magnets
Be aware that there is only one way to attach it due to the locking pins.
Last pictures show instalation. Align the holes with the pins, place it on the pins. Rotate the wheel and rotate the crank gently to make sure it's properly installed.
If you don't have a printer and wish to buy the improved version 2 you can do so at: https://www.ebay.com/itm/389384345735. That will help me continue earning some money to afford more filament and work with cool projects like this.
If you wish to support my projects donations are welcome if you feel like it (https://bmc.link/nigaubech), this helps me making more projects like this.