1 / 3
Accelerator trigger - V2 - Brush Cutter HOMELITE BCH32-C
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After several breaks at the fixation I modeled the piece in 2 parts to make it stronger.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried to print the piece by orienting it differently, but it was causing problems in other places. I also tried to strengthen the most fragile parts, but as they were less flexible they became even more brittle:(. Which is completely logical. So I decided to rethink the part and make it in 2 parts and since then I have no problem.