Comfy Clicker Fidget - Minimalist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My attempt at making an easy to print, easy to assemble, comfortable to hold Clicky Fidget.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This specific model will likely only work with PETG, possibly PLA.
I printed a few different box-style fidget toys, but could not shake the feeling that they were uncomfortable to hold.
This was one of the iterations I made (and I made MANY) that has a more curvy frame.
It can be finicky to assemble as there are no real tolerance allowed on the shafts holding it together. At the same time, any rough print edges would cause it to not fit, so you might have to file it down. The PETG is flexible enough to squeeze in and hold, PLA might work, TPU requires thicker walls.