Godox V350 Speedlite Flash Grid Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple filter you could attach to your Godox V350 speedlite flash, probably will work with the TT350 model as well.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 199
- Wydruki
- 1
- Wyświetlenia
- 1123
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple filter you could attach to your Godox V350 speedlite flash, probably will work with the TT350 model as well.
The last two photos are with and without the filter attached. Same camera and flash settings on both. You can clearly see the point flash effect you can achieve.
Print instructions
Make sure to set the number of top & bottom solid layers to 0 (zero) and the infill pattern to Honeycomb.
You can configure the density of the honeycombs by setting the infill percentage. It's also possible to experiment with the height and make it shorter, for that, cut from the bottom.
I printed mine with PETG, 15% infill density at 0.2 layer height. Works and fits perfectly.