Simple Poop Bag Holder for Small Leash
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 2 to 3 bags and fits on a basic 3/8" (small) nylon leash
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a simple and small bag dispenser for a basic 3/8" leash, so I designed one. Plenty of public bag dispensers where we walk our dogs, so no need to bring a full roll. I make sure I've got bags in there before I walk out the door and replenish along the way.
Printed on Bambu X1 Carbon using 0.4 nozzle and stock "0.20mm Strength" process (6 wall loops, 3 top/bottom layers… solid print for this wall thickness). Designed to print without support.
I've been playing with Fuzzy Skin for improved exterior surfaces, so mine was printed with Fuzzy Skin: Contour, 0.2 point distance, 0.1 thickness and Bambu Matte PLA.
See image for assembly, if you press the leash into that corner while pulling on the leash handle it should pull into the open slot.