4D Gridfinity Marker Holder (Large) - Stack markers vertical or horizontal with one print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store your markers horizontally in a drawer then move them vertically to your desk!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 577
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension).
This specific model allows for up to 6 markers to be stored. Sharpie brand fits best, but my off-brand markers fit as well although they are a bit more snug. NOTE: When used vertically there is a slight overlap off the back side preventing perfect Gridfinity compliance. I suggest using the “mini” 4D marker holder.
Printing directions: Print in the horizontal orientation so that 8 magnet slots are on the build plate. The model should be in this orientation when imported into your slicer.
Other 4D Gridfinity models of mine: