FPV Battery Divider for 30 Caliber Ammo Can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A divider for storing batteries upright in a small ammo can
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 1317
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Metal Ammo Cans provide a watertight and somewhat flame resistant storage container for Lipo Batteries (your results may vary). I created this divider to hold 10 1700mah 6s packs upright. The end two dividers will fit even larger packs (tested up to Pyrodrone Graphene 2200 6s packs) and they will all fit smaller packs. Even with the larger packs there is still room on top for some types of other batteries if you need the space.
The metal Ammo can itself is available at Harbor Freight for $13 last time I checked.
https://www.harborfreight.com/metal-030-caliber-ammo-can-57767.html?_br_psugg_q=ammo+can
Printed in Jessie PLA White:
https://www.printedsolid.com/collections/filament/products/jessie-pla-1-75mm-x-1kg-white