Mitsubishi Delica L400 Window Nut - Version 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's my second version of the window nut - this time with an embedded M5 nut to be installed mid-print.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Here's my second version of the window nut fasteners for the pop-out side windows on a Mitsubishi Delica L400.
The first version was more accurate to the original design and required an M5 nut to be glued into the body. You can check it out here.
This version has an M5 nut embedded into the print that is inserted during a pause while printing. This takes away the need for any post-processing and makes the piece stronger.
This version is also a little beefier than the original, I increased its thickness to allow more room for the nut and gain uniform wall thickness.
Click here to read about the design, BOM, and printing instructions.