1 / 5
Line 6 Helix or Narrow Pedalboard Tall Angled Floor Riser — zdjęcie 1
1 / 5

Line 6 Helix or Narrow Pedalboard Tall Angled Floor Riser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Angled Riser for Line 6 Helix or a narrow pedalboard

Ocena
0 / 5
Polubienia
8
Pobrania
57
Wydruki
0
Wyświetlenia
1218
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

Inspired by MendicinoB's 'Line 6 - Helix Stand' on Thingiverse. I needed to get my Line 6 Helix off the ground to prevent my robot vacuum from bumping into it and trying to eat the cords. So it needed to be robust enough to take discount Rosie Uniqua Jetson smacking it around.

The upper holes are for various size dowels (inch & mm) and the big slot is for a 2x4. The lower three holes are to reduce filament usage. Type A & B have a wider leg compared to the Single. Mix & match the three leg types for your needs and connect them with a long dowel or a 2x4 for stability.

This also works with <9.5" deep pedalboards and can work with deeper pedalboards with some creativity but YMMV. I used PLA @ 0.20mm w/10% infill but I don't dance much on my pedalboard.

Category: Music

Tagi