1 / 4
Power Button foot pedal for Eureka NEU192A Swivel Plus Vacuum — zdjęcie 1
1 / 4

Power Button foot pedal for Eureka NEU192A Swivel Plus Vacuum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

2,22 € – 2,71 € netto (bez VAT)

Dla pliku: Vacuum Button_0.2mm_PLA_MK3S_2h50m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 2,46 € netto (środek widełek).

Masa podana przez autora
23 g
Czas druku podany przez autora
2,84 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

this model is for the foot pedal power button used on the Eureka NEU192A Swivel Plus Vacuum

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

this model is for the foot pedal power button used on the Eureka NEU192A Swivel Plus Vacuum. 

its a direct replacement. 

i printed using a .4mm nozzle with .2mm layer lines at 15% infill 

filament was PLA+

i printed the pedal oriented with the bottom angled towards the build plate and used supports from build plate only. i uploaded an image which illustrates the print orientation. if you print the pedal in its final orientation (how its installed on vacuum) you will have issues with the assembly/mounting tabs due to the layer lines creating a fault line.

my wife has been using the vacuum with replacement pedal successfully for several months now without issue. 

Tagi