HarvestRight Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
REOLink E1 Pro camera mount for the HarvestRight Freeze Dryer
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 835
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Renote viewing of your HarvestRight Freeze Dryer can be done by camera per this video:
This is a simple 3D printed mount for the REALink E1 Pro camera shown in the video. It allows the camera to be swiveled out away when not in use. It uses the 2 screws located above the display to hold the mount. The camera mount ends snapps into place on the camera just like the one that comes with the camera. You will need to go into the camera settings and flip the picture upside down to get the right view.
It requires two 3mm screws to attach the camera mount piece and a wood screw to attach the arm to the base. As described in the video, the camera is too close to get a good focus but it works. Hopefully Harvest Right will get a WiFi or other computer interface going to help for remote management but in the meantime this helps.
I use OpenSCAD to do all my designs. It is free to download and use. This is printed using PETG filament with a 15% infill and no supports needed.
Enjoy!