1 / 3
LIDO Style Male Dual-T Mount — zdjęcie 1
1 / 3

LIDO Style Male Dual-T Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

LIDO Male Dual T-Slot to 4-Hole Adapter Plate.

Ocena
0 / 5
Polubienia
2
Pobrania
71
Wydruki
0
Wyświetlenia
334
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

LIDO Style Male Dual T-Slot to 4-Hole Adapter Plate.

I know these mounts are only a few bucks each, but what fun would that be, and why wait.
It has the same hole placement as the Original LIDO, but I moved the slots up (vertically) 5mm, they seem to be too low, so it's not "Exactly" like the original. I build it from scratch, printed and tested for fit.

Used Comgrow PLA, & PETG
Built in Freecad
Sliced in Cura 5.2.1
Default Standard Quality 0.2mm with no supports
Wall Outside to Inside
Wall thickness 0.8mm
Infill 15% - Cubic Subdivision
Printed Flat, slots up.

Your Female match may fit tightly at first, but it will loosen up after a few on/off cycles.

Tagi