WobbleX Anti Backlach Spring mount Ender 5 /Ender 6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi I hade a problem with WobbleX that it wont stay together on fast movments Added also antidrop spring.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 1574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hi I had a problem with the wobbleX that on fast movment it wont stay together .
it should fit Ender 5 /Ender 6
on the good case it would add artifacts, on a bad case the ballbearing marbles would fall.
I had my first go at it with rubber…
but i thought a spring was better and i had one from the Z bolt that i already disassmbled so you should have all the parts at hand.
***** I also added the anti drop nut layter and screwed everything together so nothing can fall off. The ball bearings kept falling.
Printed in ABS 0.4 nozzle , used M3 SCREWES . The length may vary dapending on your spring and antidrop screw.
Your millage may vary . No need for heat inserts the screws will cut their own threads.
Assembly video: