1 / 5
Cereal box filament roller with 608 bearings. — zdjęcie 1
1 / 5

Cereal box filament roller with 608 bearings.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed for feeding flex filament from cheap Walmart cereal keepers.

Ocena
5 / 5
Polubienia
41
Pobrania
183
Wydruki
4
Wyświetlenia
2613
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Designed to fit the 2 pack cereal boxes from Walmart (photo of packaging above. )

It uses 2-608 bearings and 4-m3x10 screws with nuts. It could be done without the nuts, but better safe than sorry. 

*The bearings are a loose fit in this version, either use the recommended skirting as a shim, or glue to secure the bearing to the spindle. 

The notch in the outer plate is dead center for the spindle so only one measurement is necessary for placement. 

*All parts print without supports, with the tapered flange (bearing side) of the bearing pins towards the plate.

The pillow you see in the bottom of the box is lightweight fabric with desiccant sewn in.

Now includes a 45mm roller for spools with a larger spindle. 

 

*Revision: Printing the pins on their sides will result in a better fit to the spindle and bearings, as well as increasing strength, but will require supports.

Tagi