Prusa XL and MK4 Rocket Engine (edited)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I redesigned the inside of the original model to fix a issue that shows up. I also split it in half for easier printing.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 370
- Wydruki
- 2
- Wyświetlenia
- 2203
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Share Alike
I saw that the original Rocke Engine for the XL has a significant issue that keeps coming up when you slice it. It shows as a model error. Turns out to be a ledge that it looks like two models were joined. I just removed the insides of the model and added a more simplified curve that would be more indicative for a rocket engine. While I was at it I decided to provide a split model that is more easily printed for those without an XL.
I also edited the MK4 version, the whole model was reduced by about 10% and the rocket bell was significantly shorten. This version is scaled to be the same as the XL and can be interchanged with either bell.