BlueTooth Speaker Enclosure Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First off, big thanks to Jimbotron for creating this. Here is the original.https://www.thingiverse.com/thing:2018768…
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 1189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
First off, big thanks to Jimbotron for creating this. Here is the original. https://www.thingiverse.com/thing:2018768
As posted in my original make, I added a battery pack to mine to make it portable. 3s2p out of 18650's did the trick. hot glued it to the bottom and good to go. Hours of playback time so far and still holding strong at 12V.
I wanted to go for a sealed box with passive radiators in place of the tweeters. Made some plugs for the back and modified the small covers to fit 2" radiators I got off amazon. Held in with some 1/2" finishing screws.
Last but not least was a vertical stand. Modified the bigger speaker grill in Tinkercad as well as making some legs. They are screwed together with m3x6 screws.
I had a lot of fun making this and it sounds great!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20
Filament: Hatchbox, Sunlu, Esun PLA Black, Yellow
Category: Electronics