ONE+ Tool Holder for Ryobi Link
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ONE+ Tool Holder for the Ryobi Link storage system
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 650
- Wydruki
- 5
- Wyświetlenia
- 2565
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This model allows you to hang Ryobi ONE+ 18V tools using the Ryobi Link system. It features a base that can be rotated to accommodate different mounting options. I had trouble finding the official Ryobi version at stores locally, so I decided to model my own.
Most of the model is printed at 0.3 layer height except where noted below. I recommend printing using the .3mf file as it includes some layer modifications to make sure the threads print cleanly.
- Ryobi_18V_Tool_Holder_Cleat.stl
- Infill: 10% Gyroid
- Ryobi_18V_Tool_Holder_Base.stl
- Infill: 10% Gyroid
- 0.2mm Layer Height for 0-14mm
- Ryobi_18V_Tool_Holder_Screw.stl
- Infill: 40% Rectilinear
- 0.2mm Layer Height for 10-32mm
Check out my Angled bases for One+ Tool Holder for Ryobi Link for bases with a 15 and 25 degree tilt to help with mounting oddly shaped 18V tools.