Sbox small snug gridfinity insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gridfinity insert for SBox where you can shake the box without rearranging boxes or content
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 625
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
The original inserts didn't quite fit my needs, there were some play. So I remixed it to fit perfectly in a small SBox.
Changes: The bottom grid corner towers are raised by 2mm to accomodate the full height of 3u gridfinity boxes and the top stackable insert is thickened by 3mm and half a mm is cut from all four sides. This creates a snug fit height wise in the small SBox, and a not too thight fit for the top grid in xy-dimension. I've also made the insert solid so it doubles as a lid for the lower level.
Print a small SBox, these two files and your selection of 3u and 6u gridfinity boxes.