YubiKey 5C NFC keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A keychain holder for your YubiKey 5C NFC authentication key.
- Ocena
- 4,778 / 5
- Polubienia
- 82
- Pobrania
- 940
- Wydruki
- 8
- Wyświetlenia
- 6145
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to make a nice sleeve for my YubiKey so thats what I did. I measured the key with calipers to get the dimensions.
If you want the Yubikey 5C NFC cad model check out my model found here:
https://www.printables.com/model/507874-yubikey-5c-nfc
The keychain is still a work in progress though but the .SLDPRT files are available so you can modify them if you want to. The tolerances on the keychain are quite tight so if you're going to print the keychain you might find that the fit is too tight or too lose. If that's the case just play around with the scale in your slicer for a bit. Good luck!
If you've got any questions or complaints please let me know.