universal pliers holder for wallmount system (Allit StorePlus)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a universal pliers holder, designed for wallmount systems like the Allit StorePlus and compatible ones. It…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 68
- Wydruki
- 2
- Wyświetlenia
- 472
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a universal pliers holder, designed for wallmount systems like the Allit StorePlus and compatible ones. It also has a hidden holder for little pencils, i'll admit it's a bit gimmicky, but the structure acts as a support while printing. Tis is the fourth iteration of this design, although the title says "universal", there probably are pliers that don't fit (well) into this holder. It fits all of mine though. Let me know if you have ideas for improvement!
It should be printed standing on the side, to assure stability and avoid supports.
On a 0.6 nozzle you can print it with 0.8mm extrusion width, 0.4mm extrusion height, 15% infill. Print at high temp, but use a lot of fan percentage, the thin and high structures need a lot of cooling to withstand forces while printing.
It uses very little material and prints quickly, still conserving adequate strength for everyday usage.
If you want to support my work, consider leaving a tip or a friendly comment here on Printables. :)
Category: Tool Holders & Boxes