1l Yogurt bucket hanger for Allit StorePlus System (and others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 1l yogurt buckets to make use of in your workshop. Free, airtight storage of parts, clay, paint or just…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder for 1l yogurt buckets to make use of in your workshop. Free, airtight storage of parts, clay, paint or just water to rinse you brushes or to cool a part after grinding. (Or your Fingers, when you've burnt them. ;-) )
Prints in two parts, the "hook" needs to be printed upright, to assure stability and avoid supports. Assure a good fit of the parts (probably needs some sanding) and fix them together with ca-glue/superglue.
I recommend 0.6mm nozzle, 0.8mm extrudion width, 0.4mm layer height. Don't move your printhead too fast on these settings or flow will become a problem!
If you want to support my work, consider leaving a tip or a friendly comment here on Printables. :)
Category: Tool Holders & Boxes