1 / 3
Drawer tray for Allit VarioPlus small parts drawers (and others, StorePlus) — zdjęcie 1
1 / 3

Drawer tray for Allit VarioPlus small parts drawers (and others, StorePlus)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a tray to hold small parts drawers on your wall, so you don't have them on your workspace.

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
206
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a tray to hold small parts drawers on your wall, so you don't have them on your workspace, where they're in the way. You caqn of course also place random stuff on there. Very useful!

Colour:

I recommend printing the tray in transparent, so it doesn't cast a shadow downwards. Blue and yellow is more beautifuller though. ;-)

Printing:

The tray itself needs to be printed standing on the side for stability reasons and to avoid supports. PLA will require a fan. If you have any doubts about your adhesion, use a brim. The design is somewhat prone to warping, see that you minimize drafts and take steps to avoid warping.

0.6mm nozzle, 0.8mm extrusion width, 0.4mm height for a fast and stable print.

The braces print easily, but need fitting 2.5-3mm countersunk woodscrews. m3 might also work. In any case you should test screw them in once BEFORE assembly, to assure your fit. I used a drill to widen the bore. Fix the part in a vise to hold it while drilling/screwing, or it might break.

 

If you want to support my work, consider leaving a tip or a friendly comment here on Printables. :)

Category: Tool Holders & Boxes

Tagi