1 / 5
Easy to print AA and AAA battery dispenser with backpocket — zdjęcie 1
1 / 5

Easy to print AA and AAA battery dispenser with backpocket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

AA and AAA battery dispenser with a pocket for recharge device. No supports needed

Ocena
4,667 / 5
Polubienia
11
Pobrania
44
Wydruki
3
Wyświetlenia
571
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The backpocket is for the battery recharger or for used batteries.

I printed it with a 0.6 nozzle volcano, 0.6 layer height, 2 perimeters (3 on a 0.4 nozzle), 5% hexagonal infill using Geeetech transparent PLA. I set my Prusa Mk3S to 200% speed and it printed ok

Tagi