parts for katky hydroponic tomatoes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapting buckets for Tomatoe kratky method
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
My simple stupid sytem for Katky hydroponic. I use 40L buckets. Holes are made with a bell saw and i use standard net cup of 8cm or 3inch.
Holes were made with a bell saw turning reverse direction than for wood to not grab the plastic but more slide on it.
Everything is printed in PETG black with 4 perimeters. You can use draft settings with 0.3mm layer height maybe for the funnel you would like to use 0.2mm.
I use Masterblend as fertiliser and refill by 20L so that i don't have to do it too many times.
To know if i need to refill the bucket i just lift one side with one hand to get the weight and ear the water.
The hole in the support is to put a rope that you can turn around the tomatoes for support.
Have Fun.