Triathlon Aero Bottle Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts a Profile Design Aqualite aero bottle to Profile Design T2+ DL aluminum aerobars.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 1063
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Mounts a Profile Design Aqualite aero bottle to Profile Design T2+ DL aluminum aerobars. This setup allows you to drink on a ride without reaching for a separate bottle down below. It keeps you
focused on the road and drinking more often during the bike leg of a triathlon.
Simple one-piece design. Rock solid mounting using the Velcro strap that comes with the bottle.
Snaps firmly on the bars. Much less complicated and more solid than the Profile Designs multi-part
adjustable bottle mount.
Works with other aluminum aerobars with 22mm diameter. spacing between bars 106mm
center-to-center. Recommend attaching the clip to the bars when you install them on your bike to
ensure the spacing is correct.
Also includes zip tie holes to more permanently attach if needed.
Triathlete? Check out my Triathlon Bike Number Mount too.
Print instructions
Category: Sport & Outdoors Summary
Mounts a Profile Design Aqualite aero bottle to Profile Design T2+ DL aluminum aerobars. This setup allows you to drink on a ride without reaching for a separate bottle down below. It keeps you
focused on the road and drinking more often during the bike leg of a triathlon.
Simple one-piece design. Rock solid mounting using the Velcro strap that comes with the bottle.
Snaps firmly on the bars. Much less complicated and more solid than the Profile Designs multi-part
adjustable bottle mount.
Works with other aluminum aerobars with 22mm diameter. spacing between bars 106mm
center-to-center. Recommend attaching the clip to the bars when you install them on your bike to
ensure the spacing is correct.
Also includes zip tie holes to more permanently attach if needed.
Triathlete? Check out my Triathlon Bike Number Mount too.
Print Settings
Resolution:
0.3mm layers
</div>Infill:Solid works best
Notes:
Works best in ABS. Print is in Atomic brand black ABS - great material!
Prints well without supports standing on the back surface. 102g.If you print and use, please consider posting a picture. I'd love to see your setup. Thanks. Matt