Heart with rotatable Gears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small heart with rotatable Gears designed to be a gift or for being attached to a keychain.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A small heart with rotatable Gears designed to be a gift or for being attached to a keychain.
The design consists of five peaces:
- 1x Heart
- 2x Gears
- 2x Gear holders
Can be printed just as is, no supports or special settings required. I printed mine with 0.15mm. Ironing-Mode is NOT recommended.
The parts should snap together, but sometimes (as the tolerances are tight and the part is small) you may need to glue a holder to the heart. Apply a small amount of glue to the small end of the holder, put the gear in place and push the holder in its hole. This should lock the gear into place. Both gears should spin freely.