1 / 3
Morrigan Aftermarket parts by Black Cow — zdjęcie 1
1 / 3

Morrigan Aftermarket parts by Black Cow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

optional parts for the Morrigan model

Ocena
5 / 5
Polubienia
64
Pobrania
353
Wydruki
1
Wyświetlenia
2019
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Standard Digital File License

Morrigan's Aftermarket parts: Prefix part numbers. Example : All parts starting with A will be Wide Wheels  

A- 46mm Wide Wheels for 60mm wide AG tires. (over all makes model 14mm wider) 3mm inward and 7mm outward from original wheels. Works with all Morrigan axles. 

A3Wide Hub For 3mm extra tire clearance. Use only if tire rubs

A5Wide Hub For 5mm extra tire clearance. Use only if tire rubs

B- IN SET- Works with rear non steer axle only 46mm Wide Wheels for 60mm wide AG tires. ( The offset of the wider tire is pushed 10mm inward. ) If using normal tires in front and AG in back the width is same front and back. 

CA- Passenger side dash plain 

CB- Passenger side dash Chevy symbol 

CC- Passenger side dash JokeR and jester hat

E- Axle Centers. Use these to make the pinion gears tighter. (tighter as marked)

G- Spindles with steering pivot 3x6x2.5 bearing ( need four 3x6x2.5 bearings per axle - and swap the  M3 x 10mm screws to M3 x 12mm screws)

H- Spindles with “02101 Steering Plate C-Hub Bushing Sleeves Redcat HSP” pivot (need four bushings per axle - and swap the  M3 x 10mm screws to M3 x 14mm screws)

J- Axles Plus- 0.2mm slightly over sized bearing holes. (Looser fit)

K- Axles Plus- 0.4mm slightly over sized bearing holes. (Looser fit)

L- Front Axles with tubes for Derby weights or 9mm copper coated lead weights. weights are  1back,  2front and 3front and back

M- 001 Front -540 Motor option NOT TESTED Feedback appreciated (Motor plate adaptors at bottom of Transmission Shop)

Tagi