ROOK 2020 KIRIGAMI BED MOD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mod and all of the pieces required to install a Kirigamy be on a rook 2020
- Ocena
- 4 / 5
- Polubienia
- 16
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 1209
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
This mod if for a rook 2020 printer designed by rolohaun, had a kirigami bed laying around and wanted to intall it in my new rook 2020 build but couldn't find any mods so I desinged one from scratch inspired by the rook design, I have new top and bottom rod holders for 12mm rod, If using 8mm rod version you must use the 8mm rod holders. You must drill the 4 M2 holes on each side of the metal kirigami bed with a 3mm drill bit (must be 3mm drill bit to avoid alignment problems) in oder to accept the 3x10 screws needed for rigidity of the bed mount. You might need the 2mm spacers to bring the bed closer to the nozzle (optional)
What you will need on material:
2 M5x20 Screws
2 M5 Nuts
12 M3x10 Screws
2 M3x16 Screws
14 M3 Nuts
Print instructions:
I've used ABS for all parts
print settings are:
0.2mm Layer height
40% Infill
4 perimeters
Supports not required