BambuLab P1P - ARC Enclosure - rear panel - easy opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a short mod to open the enclosure for printing PLA etc. without lifting the top-plate or open the front door.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 2098
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hi all,
I wanted to easily open the enclosre for PLA etc. printing.
Since I'm unsing an AMS, it's not possible to lift the topplate. Leaving the front door open, is also not an option.
So I design this small frame which will perfectly fit to the enclosure and the 3mm rear panel.
Easy to use and easy to print.
You will need only one M3 threated insert + screw and the 6 screws, you're already using to fix the panel.
It is not necessary to glue the frame, but of course possible.
Of course you will be able to use the ARC Spool holder too.
Note: Marked as Remix, due to the fact that the base design of the enclosure and the panels, is not mine!