Reading Bed Lamp - color controlled and timeout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Reading Bed Lamp, with control of the color "temperature" and a gentle fade-out after a timeout.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 626
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
A Reading Bed Lamp, with control of the color "temperature" and a gentle fade-out after a timeout. Color is set by rotating the base, doing so resets the timer.
The two parts that makes the ball clamp has a cone ending in contact with the base. It makes the ball of the 'nozzle' tighten.
Print instructions
Use the volume "support for base.stl" to generate supports only where it is needed.
Description and schematic are here:
https://pierremuth.wordpress.com/2019/07/27/a-bed-lamp-sunday-project/
C code for the PIC is here:
https://github.com/pierre-muth/Bed_Lamp.
It uses a PIC12F1840, a potentimeter, and a SK6812 RGB+W LED.
It can be easily done with and arduino as well.