1 / 2
Bowls for the Toy Kitchen [no supports] — zdjęcie 1
1 / 2

Bowls for the Toy Kitchen [no supports]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made these bowls for my kids to use in their toy kitchen. They are a simple design with no need for supports.

Ocena
5 / 5
Polubienia
100
Pobrania
593
Wydruki
4
Wyświetlenia
1646
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I made these bowls for my kids to use in their toy kitchen. They are a simple design with no need for supports.

I had some issues along the perimeter of the bowl halfway up. I discovered that my slicer had sliced a couple of layers with loads of small loops instead of continuous one. I fiddled with the extrusion width in the settings (increasing it from 0.45 to 0.48 specifically) and managed to reduce the issue.

Have fun and Be Inspired!

Check out the simple plates I designed as well! - https://www.thingiverse.com/thing:4707975/

Print instructions

I printed this in PLA, without supports, with the flat part down on the print bed.

Tagi