Truing Aid with Diameter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Truing Aid with Ball Diameter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi fellows,
I wanted to true my bicycle. There are alot of quick aids, but i didn't not really like them. They are quite good for field repairs and fixes. A real truing stand was to expensive so i tried to make a compromise. The print holds the diameter with a DIN912 M3 screw and a M3 Nut on its 8mm shaft. After assembly, it is mounted via the 6mm screw an the canti bolt of the fork or the rear frame. My bike has canti mounts and disc brakes. So the canti mounts where unused and free for that purpose.
I used a 8mm Shaft diameter from Aliexpress: https://de.aliexpress.com/item/1005001960863223.html?spm=a2g0o.order_list.order_list_main.5.5f8b5c5fGjiZxj&gatewayAdapt=glo2deu
I think the distance from the center of the canti bolt to rim was about 25mm. But thats alot of variety to fix it. It is only for relative measurements.
Remove after measurment and truing ;).