NeedleFile Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A stable, sturdy, and compact block to safely store my needle files, yet still keeping them easily accessible, and comfortable to hold in my hand as necessary.
Slots/holes were designed ⌀6mm x 104mm (incl 3mm bevels) - hole size might vary slightly depending on your printer settings.
Max file length that will sit snugly without hitting the bottom is 100mm (which I specifically designed it for).
SideNote:
I printed it in black because it happened to be loaded in my printer at the time - if you print a different color, please post a make/picture...
Print Settings
Printer:
Snapmaker
Rafts:
No
Supports:
No
Resolution:
Fast / Normal
Infill:
10% / 15%
Filament:
Flashforge PLABlack
Notes:
n/a
Depending on the selected print settings, there might be some stringing to clear up near the seam.
How I Designed This
Fusion 360
Should work fine with all standard Snapmaker settings (or related settings on other printers) - I did a FastPrint in order to save time - took roughly 8hrs to print.
Category: Tool Holders & Boxes