500w spindel Dust Shoe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple 3d printed Dust Shoe for your 500w Spindel
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 1111
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
This dust shoe is designed to fit a 500w spindle and collect the dust while your CNC is cutting. Thanks to the four 5mmx10mm Magnet removing the lower part becomes very easy. I had to design two versions. V1 is quick to print but it sticks the front. For my machine this this didn't work so I had to make V2.
It's up to you what you want to use as a sweeper but I used some laminate foil. Other than most designs this lets you see what is going on.
If you are interested about it's performance I made a video designing this and more.
Print settings:
- Layer height: 0,2mm
- Outer walls/perimeters: 4
- Bottom layers: 3
- Top layers: 4
- Infill: 10%
- No supports