IC-705 Peovi Cage Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Peovi Cage for IC-705. Adds a bit of height to the radio.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 913
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I had an idea one day for an antenna mount for my Peovi cage. The only problem was that my 705 wouldn't stand up straight when the extended battery was in. Several drafts later…
Don't expect perfection here. I reached “good enough” with the third or fourth test print and it worked, so I haven't felt the need to print a final revision.
Printed with generic PLA, paint on supports for the holes and major overhang. Somewhere between 15-25% infill seems to be fine. Print one of each of the L and R stands and 2 of the stabilizers. I added electrical tape to increase friction with flat surfaces.
Your mileage may vary. Do not expect this plastic to protect your $1,400 radio from drops, spills, EMP, space pirates, etc. This item comes with no warranty.