1 / 2
P-CUBE hi-fi speakers with Voxel subwoofer — zdjęcie 1
1 / 2

P-CUBE hi-fi speakers with Voxel subwoofer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is my latest speaker system, it's a set of hi-fi grade speakers designed to be printable on small-bed 3D…

Ocena
5 / 5
Polubienia
135
Pobrania
348
Wydruki
3
Wyświetlenia
4737
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here is my latest speaker system, it's a set of hi-fi grade speakers designed to be printable on small-bed 3D printers, including the Prusa Mini. It's a sub-woofer and satellite system usable as a 2.1 stereo system, or a home cinema system.

Frequency response is 35Hz - 20kHz, with the sub-sat crossover at around 135Hz. The subwoofer stands vertically with a 18 x 18 cm footprint, the satellites are 65mm cubes, with stands or a wall mounting bracket. The speakers can be driven by a standard home cinema amplifier, a low cost 2.1 Class D amp, or a DSP based amp with the code provided. The system will play loud but not defending in a 2.1 set-up, you can double up on the satellites if you want more power handling. Either the sub or the satellites can be taken alone and partnered with other speakers with appropriate frequency response.

The sub-woofer acoustic design is based on the highly respected Voxel sub-woofer by renowned speaker designer Paul Carmody, and the satellites are my own design.

It's a bit more complex than previous projects, so I made an Instructable:
https://www.instructables.com/P-CUBE-Speaker-System/

Print instructions

Full instructions here:
https://www.instructables.com/P-CUBE-Speaker-System/

Tagi