Dremel/Vermont American Drill Press Adaption Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created a clamp mount to use my Dremel on Vermont American DrillPress jig.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 883
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
My Drill Press was made to hold older style hand drill not a Dremel.
I wanted and needed way to mount Dremel rotary tool on it.
Thanks to 3D printer I was able to make a trihole clamp to mount my Dremel to it.
I made an adapter plate that the Dremel directly screws on to with no modifications to the Dremel, and without directly modifying the Drill Press.
So, I made the plate in two parts to clamp to the bracket using three nuts and bolts.
I used stock mount the stock clamp on one side using the two wing nuts to fasten right side and left side. added washers and nuts to add compression strength. used 2 inch x ¼ for front bolt and 3 washers . It is strong mount and the arbor is perpendicular to the moveable table and base. Works in Horizontal position too.
No modification to press or tool with this adapter plate.