Quest 2 Eleven Table Tennis ping pong Paddle adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'd rather print stuff myself so I made this adapter and decided to share it.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
This is made completely from scratch by looking at the pictures. I'm a complete beginner at CAD modeling and made many prints before I was satisfied with it. For me it works quite well but one can always create new profiles for this adapter and upload it to the cloud.
For this, you need the following:
- Two m3 screws at least 30mm in length
- Four m3 nuts
- Two m3 thumbscrew from Parametric Thumbscrew
- And Grip from the original Sanlaki
As for printing, I chose ASA as it's lighter than PLA or PETG and I ended up with 168gr. with AAA battery and no battery cover.
Print Settings for the adapter:
- 0.16 layer height
- 2 walls
- 3 top and bottom layers
- 5% gyroid infill
- To get the mesh look, set top and bottom to 0 layers and use 15% honeycomb infill
For the grip, same as above but I recommend printing with fuzzy skin. Much better in the hands this way.
Resized by 120% in Blender before the boolean operation. Blender file is also included. I'm terrible at modeling and bottom part needs to be fixed in Prusaslicer like slicers.
This would not be possible without the awesome 3d scanned controller: Oculus quest 2 Control Scan by Gon Garcia
