Collet RMX for thread cutters M3 M4 M5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remixed Collet to fit thread cutters M3-5
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
Thanks to the Kraftform Tool Holder designed by dodash you can use multiple tools with one grip by just changing the negative volume in center of the collets for different tool sizes.
the original model provides a hex bit version and some round ones for files etc.
this Remix fits the (almost) square of thread cutters for M3, M4 & M5.
I would suggest sticking to the print instructions of the original design but there are none for the collets…
printed mine quite strong in PETG because of the forces I estimated and got good results with these settings:
0.2 layer height
no supports
no brim (if your bed is sticky and you print a little slower)
50% Infill
4 perimeters
7 top/bottom layers
as always I highly appreciate every like, rating or make, same for remixing and sharing.
donations will be forwarded to sea-watch.org