1 / 6
Filament Cutter 45° (No screws)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Only basic blades are required
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 159
- Wydruki
- 2
- Wyświetlenia
- 715
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (47)Powiązane
When I use this model:https://www.printables.com/model/67509-filament-cutter-45deg
Since I don't have M3 x 25 mm or pieces of ball pen spring,So I had to redesign a Filament Cutter.
Now to use this model you only need the blade.
Print parameter:
- Please refer to the picture to open the support when printing.
- Use PETG.
