ROG ALLY dock cover v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a cover for the xg mobile expansion port. remixed from konseben's design
- Ocena
- 4,667 / 5
- Polubienia
- 211
- Pobrania
- 2610
- Wydruki
- 13
- Wyświetlenia
- 7623
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This design is based on konseben's original design, that was working fine, but i wanted to fine tune it a bit. Print it with at least petg, as pla will melt there under load.
here are the changes that i made:
made it 0.18mm longer(35.62mm to 35.8mm)
moved the C side pin 0.4mm outwards, for better alignment
longer pins(7mm from 2mm)
smaller corner radius(0.5mm from 0.75mm)
moved, shrunk C connector hole, for thicker, stronger part
Update: The v2 design is just to add better compatibility with different printers. I modified the pins to have different size, depending on your printer's accuracy, you can choose between 5 different size: the original and +/- 0.1mm or 0.2mm.
i also included the step file as konseben did, so further refinement can be done if needed.