variable horizontal toggle clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holddown clamp with the option to vary the height of the workpiece being held.
- Ocena
- 0 / 5
- Polubienia
- 168
- Pobrania
- 294
- Wydruki
- 0
- Wyświetlenia
- 1729
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted some of those variable holddown clamps, but i am too cheap to buy them. So i designed these in CAD. Everything is designed for M6 screws, as i use this size for everything.
Hardware needed:
4x M6*20, 8 Washes, 1x M6*100, 1x M6 nut, 5x M6 Locknut.
you will also need a knob for the M6*100 screw (i used my own https://www.printables.com/de/model/508638-knob-for-m6-screw) and hardware to screw the clamp down.
It should be easily assembled, just pay attention to insert a normal nut (not a locknut) in the bottom of the slider, and it unfortunately takes a long time to thread the locknut on the M6*100