NeoPixel Lamp for 256x256 Beds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rings Lamp: I wanted to make this but the ring lamp would not fit on my bed size. I did a quick slice and dice to make…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Rings Lamp:
I wanted to make this but the ring lamp would not fit on my bed size. I did a quick slice and dice to make this fit on 256x256 beds.
Rings Lamp Base:
I combined the project container and stand. I fixed the container so the lid is a much stronger and tighter fit. There is also an alternate base design as well.
For the other STLs, parts, and directions see the original design. Below is the link to adafruits project guide.
https://learn.adafruit.com/neopixel-ring-lamp/overview
Print Settings
Printer:
Bambu Lab X1 Carbon
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.20mm
Infill:
15%
Filament:
SunLu PLA+Black
Notes:
On the base I used a height modifier in OrcaSlicer for 0mm-5mm to be 100% infill to add some weight.
I suggest using some CA glue along with the screw to attach the Rings to the lid.
Category: Decor