1 / 3
Atomic Pinball - Replacement Flippers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These flippers are from an old toy pinball machine.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
These flippers are from an old toy pinball machine. The original pieces kept breaking, and the owner had to keep gluing them back together. I was asked to model and print some replacements.
I modeled the parts in Fusion 360. They were then exported as STLs and rotated in Prusa Slicer and exported again. This is the best orientation I found to print them.
The Plastic is PETG from DuramiC 3D. I'm sure PLA would be fine, this was just the only orange plastic I had laying around.